| Recommended Additional Parts Needed for Installation |
Run your car on water
| Additional Product Page |
BY
Waterworks 4 Fuel . COM
site
| Temperature Gauge Mechanical Sensor |
| 12 volt Relay single pole double throw 5 pin with socket Rated at 30 to 40 amp. |
| 2 inch Panel Ammeter |
| Electronic Fuel Injection Mixture Ratio Meter |
| *Note": The shown brand "Sun Pro" Is a registered trademark of The Snap On Tool Company |
| This Fuel Ratio Meter connects to the Oxygen sensor Upstream of the catalylic convertor Meter is a multicolor LED bar display |
| This page is added October 12, 2008 |
| 2" Panel Mount Adapter Dual Bracket |
Sunpro CP8210 Air Fuel Gauge
$39.99 msrp +commission +tax and
shipping
$39.99 msrp +commission +tax and
shipping
SunPro 2" Ammeter Gauge
Sun cp 8204 2" ammeter
$16.99 msrp + commission +tax and
shipping
Sun cp 8204 2" ammeter
$16.99 msrp + commission +tax and
shipping
SunPro Mechanical Temperature Gauge
Sun cp 8207 Temp. gauge
$24.99 msrp +commission + tax and
shipping =(S&H)
Sun cp 8207 Temp. gauge
$24.99 msrp +commission + tax and
shipping =(S&H)
Relay 12v 5591pt mini relay
$7.99 msrp +(s&h) + commission
$7.99 msrp +(s&h) + commission
Sun Pro Chrome panel bracket
2" dual panel bkt cp7580
$6.99 msrp +commission + s&h
2" dual panel bkt cp7580
$6.99 msrp +commission + s&h
| This page is for information If You wish to make a purchase Here Place an order, Please Contact Me, with Details Commission is 10% Actual s&h to be determined at time of shipping. Orders will be shipped within 24 hours excepting weekends Only after the payments have cleared..and to PAYPAL verified addresses. |
10 Gauge Primary Wire
for connection of the Hydro Cell to The relay
$5.99 estimated price. + comm +s&h
for connection of the Hydro Cell to The relay
$5.99 estimated price. + comm +s&h
W1267 Oxygen Sensor Socket
$7.99 + com +s&h
$7.99 + com +s&h
Additional parts recommended
Ring terminals for #10 wire sized to fit.
Fuse holder and 30 amp fuse
or
30 amp Breaker, Install close to the battery
connection.
PWM device to control the cell current.
10 Ga. Wire for hookups
Switch to remote control the cell relay
E F I E to control the mixture o2 input.
{ Info - Click Here ]
Windshield washer water pump for
electrolyte refill with a manual switch..
Misc: hardware and wire ties and mounting
brackets. Suggest using galvanized Steel
brackets from Home Depot or other store
made by "Simpson Strong Tie" normally
used in home construction..
Plus bolts, nuts and wire connectors.
Fuse holder and 30 amp fuse
or
30 amp Breaker, Install close to the battery
connection.
PWM device to control the cell current.
10 Ga. Wire for hookups
Switch to remote control the cell relay
E F I E to control the mixture o2 input.
{ Info - Click Here ]
Windshield washer water pump for
electrolyte refill with a manual switch..
Misc: hardware and wire ties and mounting
brackets. Suggest using galvanized Steel
brackets from Home Depot or other store
made by "Simpson Strong Tie" normally
used in home construction..
Plus bolts, nuts and wire connectors.
Next page
Click here
to page 5
Click here
to page 5
| Return to main Products page Click Here |
| Updated February 22 2009 |
Electric Temp sensor gauge is also
available for about the same price.
available for about the same price.
Supplimental Hydrogen
From Water
From Water
| Q&A INFO CLICK HERE |
| Go to sales page Click here |
| Go to sales page Click here |
| Go to sales page Click here |
| Go to the Home page Click Here |